WiFi server onboard.
Connect your printer to a local WiFi network and print remotely. A dedicated web interface provides easy control and access to every detail.
From g-code upload and configuration to print control, everything on your favourite device.
Requires accessible WIFI network.
Compact, integrated printhead.
Light, lit and robust. Integrated print effector including all you desire and a bit more, for expansion.
- Hotend cooling fan.
- Print cooling blower fan.
- 6 star white LEDs.
- 3 pin connector for an optional IR probe.
- Hotend with 30W cartridge heater and thermistor.
Quick release locking build plate.
Change your plate in seconds and start new job. Spire workplate provides you a non blocking printing workflow and is fun to use. Use your favourite adhesive stuff, and go.
And yes, it’s heated, ofcourse!
Backlash free magnetic joints.
Precise and smooth positioning, with a snap!
Light and stiff carbon rods.
Light and stiff carbon rods, flexible to use, rigid where it’s due.
Monkeyfab Spire Cluster. Maximize efficiency.




Your material reel is safe from dust, for reliable long prints and filament free desktop landscape.

Your material reel is safe from dust, for reliable long prints and filament free desktop landscape.

Precise and smooth positioning, with a snap!
32 bit controller and high end Trinamic drivers keeps them at speed.
From g-code upload and speed knob to firmware reflash, full access at your fingertips. Requires accessible WIFI network.
From g-code upload and speed knob to firmware reflash, full access at your fingertips. Requires accessible WIFI network.
- WIFI connectivity
- Automatic calibration
- Easy change integrated printhead module
- Quick release heated print platform
- Magnetic backlash free joints
- Hidden filament chamber
- Removable polycarbonate shields (optional)
- Size: 300 x 300 x 575 mm
- Weight: 10kg
- Box size: 370 x 370 x 720 mm
- Box weight: 12kg
- Power consumption: 120W peak / 70W avg.
- Power supply: 110 – 220 VAC input / 19V 6.3 A output
- Max. print volume: cylinder 150 x 165 mm
- Max. hotend temperature: 262 C
- Max. platform temperature: 120 C
- Material (filament) diameter: 1.75 mm
- Nozzle diameter: standard 0.4mm nozzle
- Min. recommended layer height: 0.05mm
- Positioning repeatability: 0.07mm
- Duet WIFI controller
- 32 bit ARM processor
- Trinamic high precision stepper drivers
- Network connectivity
- Easy to use
- High level of control
- ABS
- PET
- Nylon
- PLA
- PHA
- HIPS
- Hard elastomers
- Other experimental materials
- Firmware: RepRapFirmware by David Crocker
- Recommended printer host: Duet Web Control by Christian Hammacher
- Recommended slicer: KISSlicer
Make massive models. Smooth and reliable.